Floor Cleaning - Kärcher FR 30 Mode D'emploi

Note
The exit jet must be directed parallel to the
rotation arm.
Adjust the wrench area of the nozzle
(width 10) so that it is parallel to the rota-
tion arm.
Tighten the Union joint (width 22) using a
wrench.

Floor cleaning

Connect the steel pipe of the high pres-
sure cleaner to the FR 30 and tighten it
with wrenches (width 24).
During breaks in working, tilt the hand
spray gun with spray pipe towards the
front. The appliance is then in its parking
position.
Clear the floor using high
pressure cleaners K6 or K7.
1 Hand spray gun with bayonet connection
2 Steel pipe extension 0.5 m (order no.
4.760-558.0 or steel pipe extension 0.9
to 1.7 m (order no. 2.639-722.0)
3 Adapter (order no. 4.762-402.0)
4 FR 30
Connect the components with one an-
other as shown above.
7
English