Install Flue Mounting Bracket - Best WC33I Manuel D'instructions

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

INSTALL FLUE MOUNTING
BRACKET
D
UCTED OR NON-DUCTED
HOODS
WITH FLUE
1. Assemble the flue mounting bracket,
adjusting outside width as shown.
Fig. 10.
2. Carefully center the mounting bracket
directly over the range hood location.
3. Secure the bracket assembly to the
ceiling using (2) 4.8 x 38 mm mount-
ing screws and drywall anchors.
Fig. 11. Make sure the bracket is pushed
into the corner, tight against the wall
and centered over the hood.
FLUE MOUNTING BRACKET
DRYWALL ANCHORS
4.8x38mm
MOUNTING
SCREWS
- 10 -
3.9 x 6 mm FLAT HEAD
BRACKET SCREWS
7-11/16"
FIG. 10
CENTERLINE
OF HOOD
FIG. 11

Publicité

Table des Matières
loading

Table des Matières