Install Flue Mounting Bracket - Best WC26E Mode D'emploi

INSTALL FLUE MOUNTING
BRACKET
1. Assemble the flue mounting bracket,
adjusting outside width as shown. Fig.10
2. Carefully center the mounting bracket
directly over the range hood location.
3. Secure the bracket assembly to the ceiling
using (2) 4.8x38mm mounting screws
and drywall anchors (Fig. 11). Make sure
the bracket is pushed into the corner,
tight against the wall and centered over
the hood.
FLUE MOUNTING BRACKET
MOUNTING SCREWS
- 12 -
3.9 x 6 mm FLAT HEAD
BRACKET SCREWS
9-13/16"
(24.9 cm)
DRYWALL ANCHORS
4.8x38mm
FIG.10
FIG.11