Troubleshooting - Belkin N1 Mode D'emploi

Troubleshooting

Troubleshooting
I can't connect to the Internet wirelessly.
If you are unable to connect to the Internet from a wireless computer,
please check the following items:
1.
Look at the lights on your wireless router. If you're using a Belkin
Wireless Router, the lights should be as follows:
• The "Power" light should be on.
• The "Connected" light should be on, and not blinking.
• The "WAN" light should be either on or blinking.
If your Belkin Wireless Router's lights have the above characteristics, go
to number 2 below.
If this is NOT the case, make sure:
• The router's power cord is plugged in.
• All cables are connected between the router and the modem.
• All the modem's LEDs are functioning correctly. If not, see your
modem's user manual.
• Reboot the router.
• Reboot the modem.
If you continue to have issues, please contact Belkin Technical Support.
If you are not using a Belkin Wireless Router, consult that router
manufacturer's user guide.
2.
Open your wireless utility software by clicking on the icon in the
system tray at the bottom right-hand corner of the screen. The tray
icon should look like this (the icon may be red or green):
3.
The window that opens should have a list of "Available Networks".
Available networks are wireless networks to which you can connect.
If you are using a Belkin 802.11g (G Plus) Router, or Belkin 802.11g
(54g) Router, "Belkin54g" is the default name.
If you are using a Belkin 802.11b Router, the default name should
be "WLAN".
If you are NOT using a Belkin Router, please consult your router
manufacturer's user manual for the default name.
30 30