Belkin N1 Mode D'emploi page 28

Using the Belkin Wireless Networking Utility Using the Belkin Wireless Networking Utility
WPA-PSK (no server)
Choose this setting if your network does not use a radius server. WPA-PSK
(no server) is typically used in home and small office networking.
1.
From the "Network Authentication" drop-down menu, select
"WPA-PSK (no server)".
2.
Enter your network key. This can be from eight to 63 characters
and can be letters, numbers, or symbols. This same key must be
used on all of the clients (network cards) that you want to include
in your wireless network.
26 26