Other Settings; Alarm; Low Battery Warning; Reset - Oregon Scientific GR101H Manuel D'utilisation

Other Settings

ALARM

The Remote Monitor also has alarm
function with snooze.
Set Alarm
1. Press .
The BMI box will
indicate that you
are now in
Alarm Mode.
2. To adjust the alarm time:
a. Press and hold SET.
b. Press /
and minute. Press SET to
confirm.
3. To turn alarm on/off, press
When turned on, the
appear.
4. Press anytime to return to
normal clock display.
Snooze
When the alarm rings:
• Press
snooze off.
• Press any other buttons to
temporarily disable the alarm
for 8 minutes (
icon will appear).
to adjust the hour
/ .
icon will
to turn alarm /

LOW BATTERY WARNING

Scale
The LED Indicator also functions as a
warning indicator. When you step on the
scale, the following LED colour indicates:
• Green - Adequate battery level.
• Yellow - Low battery level.
Replace the batteries.
• Red - Scale is in error. Consult
the TROUBLESHOOTING
GUIDE for more information.
Remote Monitor
The LCD Display can show Low Battery
Warning symbols for both the Scale and
the Remote Monitor:
The Remote Monitor's
batteries are low.
The Scale's batteries are
low.

RESET

The RESET hole is used whenever the
product is not performing as expected
(such as when the Remote Monitor
cannot detect the Scale) or when new
batteries are inserted. This will return the
settings to default values.
Both the Scale
and Remote
Monitor have
RESET holes
located inside
the Battery
Compartment.
Use a blunt
stylus such as
a paper clip to
press into the
hole.
7