Cleaning And Maintenance; Overview Of Cleaning; Cleaning The Water Filter; Clean The High-Pressure Jet Nozzle - Lux Tools HD-130/1800 Notice Originale

Hochdruckreiniger_389841.book Seite 38 Montag, 19. November 2012 5:15 17
GB
– Insert the jet pipe for low pressure (8) into
connecting pipe (7) and rotate by approx.
90° until the two parts are securely con-
nected (bayonet connection).
– Remove the cleaning agent container (1)
from the holder.
– Fill the storage tank (1) with cleaning
agent.
– Place the container in the holder and
close the lid.
– Set the jet pipe by adjusting the noz-
zle (22) to low pressure.
– Switch on the machine.
– Spray the cleaning agent onto the dry
surface and let it soak (do not let dry).
– Set the jet pipe by adjusting the noz-
zle (22) to high pressure.
– Use the high-pressure jet to rinse off any
loosened dirt.

Cleaning and maintenance

► P. 6, item 18, ► P. 6, item 19
DANGER!
Risk of injury!
Before carrying out any work on the
product, ensure that the mains plug
is pulled out of the mains socket and
the product is depressurised.

Overview of cleaning

Regularly, depending on conditions of use
What? How?
Clean the machine. Wipe the unit with a
slightly damp cloth
Do not clean the ma-
chine using a high-
pressure water jet.
► Clean the high-
Clean the high-pres-
sure jet nozzle. pressure jet nozzle –
p. 38

Cleaning the water filter

– Remove the plug-in coupling for the
water connection (13).
– Remove the water filter (18) from the
plug-in coupling and clean using water.
38

Clean the high-pressure jet nozzle

– Remove contamination from the nozzle
opening using the needle provided and
flush from the front with water.

Storing, transport

Storing

– Store the machine where it is dry and well
ventilated.
– When placing the machine out of service
for an extended period of time, remove
the cleaning agent and drain all the water
left in the hoses.
NOTICE!
Risk of machine damage!
Frozen residual water may damage
the machine! If there is a danger of
frost, store the machine including all
accessories in a place protected
from frost.

Transport

– If shipping, use the original packaging
wherever possible.
Malfunctions and troubleshoot-
ing

In the event of a malfunction...

DANGER!
Risk of injury!
Improperly conducted repairs may
prevent your machine from working
safely. Such repairs will endanger
you and your surroundings.
Minor faults are often sufficient to cause a
malfunction. In most cases, you will be able
to correct these faults easily yourself. Please
start by referring to the following table before
contacting your OBI market. This will help
you save much effort and possibly expense.