Personal Safety Equipment; Your Machine At A Glance; Installation; Commissioning - Lux Tools HD-130/1800 Notice Originale

Hochdruckreiniger_389841.book Seite 36 Montag, 19. November 2012 5:15 17
GB
• Symbols affixed to your unit may not be
removed or covered. Information on the
unit that is no longer legible must be
replaced immediately.
Before putting the unit into opera-
tion, read and observe the instruc-
tions for use.
In accordance with EN 61770, the
product must not be directly con-
nected to the public drinking water
supply.
Always use a system separator in
accordance with EN 12729 type
BA.

Personal safety equipment

Wear safety glasses for all types of
work.
Wear protective clothing for all types
of work.

Your machine at a glance

1. Cleaning agent tank
2. High-pressure cleaner
3. Holder for spray gun
4. Cable holder
5. Handle
6. Terrace cleaner
7. Connecting pipe
8. Jet pipe for low pressure
9. Jet tube with high-pressure jet nozzle
10. Hand-held spray gun
11. High-pressure hose
12. Screws 4×
13. Plug-in coupling for water connection
14. Cleaning needle for high-pressure nozzle
15. Instructions for use
Note:
Should any part be missing or dam-
aged, please contact your dealer.
36

Installation

► P. 3, item 1 – ► P. 4, item 6
– Insert the handle (5) into the high-pres-
sure cleaner and fasten using
screws (12).
– Attach the holder for the spray gun (3) to
the cable holder (4).
– Screw the high-pressure hose onto the
high-pressure connection (16) of the
product and tighten.
– Screw the high-pressure hose to the cou-
pling (17) of the spray gun (10).
– Insert the jet pipe for low pressure (8) or
the jet pipe with high-pressure nozzle (9)
into the spray gun (10) and rotate by
approx. 90° until the two parts are
securely connected.
– Insert the terrace cleaner (6) into con-
necting pipe (7) and rotate approx. by 90°
until the two parts are securely con-
nected.
– Insert the connecting pipe (7) into the
spray gun (10) and rotate by approx. 90°
until the two parts are securely con-
nected.
– Screw the supplied plug-in coupling (13)
onto the water connection of the product
by hand.

Commissioning

► P. 4, item 7 – ► P. 5, item 12

Water supply

NOTICE!
Risk of environmental damage!
In accordance with EN 61770, the
product must not be directly con-
nected to the public drinking water
supply.
Always use a system separator in ac-
cordance with EN 12729 type BA.
Note:
Observe the regulations of your
water supply company.
The following accessories are required for
connecting the machine (not included):