Health Advice; Additional Safety Instructions - Evolution TWISTER Instructions Originales

a hazardous atmosphere. Developing
vapour may be inhaled or be ignited by the
sparks the power tool produces.
c) Do not mix food. Power tools and their
accessories are not designed for processing
food.
d) Keep the cord away from the working
area. The cord may be entangled by the
mixer basket.
e) Ensure that the mixing container is
placed in a firm and secure position. A
container that is not properly secured may
move unexpectedly.
f) Ensure that no liquid splashes against
the housing of the power tool. Liquid that
has penetrated the power tool can cause
damage and lead to electric shock.
g) Follow the instructions and warnings
for the material to be mixed. Material to
be mixed may be harmful.
h) If the power tool falls into the material
to be mixed, unplug the tool immediately
and have the power tool checked by a
qualified repair person. Reaching into the
bucket with the tool still plugged in can lead
to electric shock.
i) Do not reach into the mixing container
with your hands or insert any other
objects into it while mixing. Contact with
the mixer basket may lead to serious personal
injury.
j) Start up and run down the tool in the
mixing container only. The mixer basket
may bend or spin in an uncontrolled manner.
(2.7)

HEALTH ADVICE

WARNING: When using this machine, dust
particles may be produced. In some instances,
depending on the materials you are working
with, this dust can be particularly harmful.
If you suspect that paint on the surface
of material you wish to cut contains lead,
seek professional advice. Lead based paints
should only be removed by a professional
and you should not attempt to remove it
yourself. Once the dust has been deposited
on surfaces, hand to mouth contact can result
in the ingestion of lead. Exposure to even
low levels of lead can cause irreversible brain
and nervous system damage. The young and
unborn children are particularly vulnerable.
www.evolutionpowertools.com
You are advised to consider the risks
associated with the materials you are working
with and to reduce the risk of exposure. As
some materials can produce dust that may
be hazardous to your health, we recommend
the use of an approved face mask with
replaceable filters when using this machine.
You should always:
• Work in a well-ventilated area.
• Work with approved safety equipment,
such as dust masks that are specially
designed to filter microscopic particles.
(2.8)
WARNING: the operation of any power tool
can result in foreign objects being thrown
towards your eyes, which could result in
severe eye damage. Before beginning power
tool operation, always wear safety goggles
or safety glasses with side shield or a full face
shield where necessary.

ADDITIONAL SAFETY INSTRUCTIONS

• A suitable industrial mixing tub, preferable
plastic, should be sourced and sited on a
secure and stable horizontal surface.
• The operator should be aware of the
routing of the supply cable and ensure that
it does not pose a trip or entanglement
hazard. Care should also be taken to ensure
that the cable is not routed across surfaces
that could damage or cut the cable.
The cable should not be routed near or
through moist, damp or wet areas.
• The operator should adopt a secure stance
with both feet firmly planted and slightly
apart. This machine also requires the use
of both hands. This machine cannot be
used 'one handed'.
• The operator should wear close fitting work
clothes or a fitted boiler suit when using
this equipment. Loose fitting clothes pose
a hazard as they can become entangled in
the rotating parts of the machine.
• Loose jewellery and jewellery chains etc
should be removed and safely stored before
operating this machine. Loose jewellery can
pose a hazard as it can become entangled
in the rotating parts of the machine.
• The operator should hold this machine
8