Perry Electric 1TPTE530 Mode D'emploi page 31

PROGRAMMABLE FUNCTIONS TO ADAPT TO THE TYPE OF INSTALLATION
SETTING OF THE TEMPERATURE SCALE
The thermostat is preset in production for viewing the tempera-
tures in centigrades (Celsius), it is possible however to change
to the Fahrenheit scale or viceversa with the following proce-
dure:
ADJUSTMENT OF ROOM TEMPERATURE READING
If for any reason the thermostat is installed in a position for
which the measured temperature might be influenced (eg. an
external wall which in the winter is on average colder that the
rest of the house) it is possible to set an Offset (adjustment
reading) of the measured temperature, the adjustment which
can be set is from
Press the or key to
change the current
setting.
Press the OK key to save
and move to the following
setting or keep it pressed
for at least 4 seconds to
save the new setting and
exit the program menu.
to or from to
-2 °C +2 °C -3.6 +3.6 °F.
Press the
change current Setting.
Press the OK
and move on to the
following setting or keep
it pressed for at least 4
seconds to save the new
setting and exit the
program menu.
EN
or key to
key to save
31