Controls - Cafe CSB42 Manuel D'utilisation Et D'installation

Controls

NOTE: The refrigerator is shipped with protective film covering the temperature controls.
If this film was not removed during installation, remove it now.
The temperature controls are preset in the factory at 37°F (3°C) for the refrigerator compartment and 0°F (-18°C) for
The temperature controls can display both the SET temperature as well as the actual temperature in the refrigerator
environment.
Changing the Temperature for Non-dispense Models
To change the temperature, press and release the
(+) or (-) pad to the desired temperature set point for
refrigerator to reach the temperature you have set.
Changing the Temperature for Dispense Models
To change the temperature, press and release the
Freezer or Fridge pad. The display will show the set
temperature. To change the temperature, press either the
Freezer or Fridge pad until the desired temperature is
displayed.
49-1000081
Dispense Models
Non-dispense Models
SET temperature based on usage and operating
To turn OFF cooling system, press and hold either (+)
pad until both displays show OFF.
To turn OFF cooling system, press and hold Fridge
and Ice Maker simultaneously for 3 seconds. When the
cooling system is OFF the display should read OFF.
5