GE Hotpoint HDA2100VWW Manuel D'utilisation page 9

Operation of models with cycle dial
rinse Only
For rinsing partial loads that will be washed later. do not use detergent.
plate Warmer or drying
For warming clean dishes and serving plates. This cycle will take approximately 39 minutes.
Hot Start or Hot prestart Option
Preheats wash water.
Start
Slowly turn the Dial to the STArT or On position, or the selected cycle. Don't turn it past the STArT,
On or cycle position; you could accidentally miss a prewash.
There is a time delay between start-up and water fill so you will not hear any wash action right
away.
n
1 Make sure HEATEd dry is not selected.
2
Be sure the door is unlatched.
1 Load clean dishware to be warmed.
2
Select HEATEd dry On.
3 Be sure the door is unlatched.
1
Select the HOT STArT or HOT prESTArT
cycle and any other option on the push
button pad.
2 Be sure the door is unlatched.
Short Wash or light Wash or Water Saver
For quickly washing loads of everyday dishes with light to medium soils that have not dried on.
1 Be sure the door is unlatched.
2 Slowly turn the Dial to SHOrT WASH,
lIGHT WASH or WATEr SAvEr.
(Models with a dial)
Latch the door to begin the cycle.
3 Slowly turn the Dial to rInSE Only.
4
Latch the door to start the cycle.
4 Slowly turn the Dial to plATE WArMEr or
dryInG.
5 Latch the door to start the cycle.
3 Slowly turn the Dial to HOT STArT or
HOT prESTArT.
4 Latch the door to start the cycle.
3 Latch the door to start the cycle.
GEAppliances.com
9