Main Menu; Navigating In The Menu; Menu Options - Bosch Wallscanner D-tect 200 C Professional Notice Originale

52 | English

Main Menu

To access the main menu, press the left-hand function button (15).

Navigating in the menu

– To scroll through a menu: Press the up (17) or down (12) arrow buttons.
– To switch to a submenu: Press the red start button (16) or the right-hand arrow
button (7).
– To confirm a selected menu option: Press the red start button (16).
– To change a menu option using the on/off switch: Press either the red start
button (16), the left-hand (14) or the right-hand arrow button (7). This will also save
the menu option.
– To go back to the next highest menu: Press the left-hand function button (15) under
the back arrow.
– To leave the main menu and go back to measuring: Press the right-hand function
button (6) under the Home symbol.

Menu options

– <Measuring mode>
Set the required measuring mode (see "Overview of the measuring modes", page 43).
Once you have made your selection, the measuring tool will directly switch to the se-
lected measuring mode.
In the <Object Detection> measuring mode, you can also set the wall type suitable
for the planned measurement and the view for the measurements.
– <Device Settings>
▪ <Ruler>: Switch on/off the ruler for the measuring modes <Object Detection>
(with the exception of the <Spot View>) and for the <Leakage Detection>. Using
the ruler, you can determine the distance between object centres, for example.
Press the right-hand function button (6) to set the ruler to zero.
▪ <Depth mode>: Choose between the indicator for the <Object depth> and the
maximum permissible <Drilling depth>.
▪ <Display brightness>: Set the brightness level of the display backlight.
▪ <Audio signals>: Switch the audio signal on or off. When the audio signal is
switched on, an audio signal sounds every time a button is pressed and every time
an object is found within the sensor range.
▪ <Start-up settings>: Choose the settings (e.g. wall type, view, ruler) that the
measuring tool starts up when it is switched on. Choose between applying the set-
tings from the last time the tool was switched off and personalised basic settings
(these are the current settings in the main menu).
1 609 92A 5L5 | (11.01.2021) Bosch Power Tools