General Safety Instructions - LaserLiner CondenseSpot Plus Mode D'emploi

Masquer les pouces Voir aussi pour CondenseSpot Plus:
Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 34
Completely read through the operating instructions, the „Warranty and Additional Information"
!
booklet as well as the latest information under the internet link at the end of these instructions.
Follow the instructions they contain. This document must be kept in a safe place and if the laser
device is passed on, this document must be passed on with it.
Function/Application
The CondenseSpot Plus is an infrared temperature measuring device with an integrated hygrometer which
permits non-contact temperature measurement of surfaces and calculation of dew point temperature. The
instrument measures how much electromagnetic energy is emitted in the infrared wavelength range and
uses this information to calculate surface temperature. With the integrated sensors, the device detects
thermal bridges as well as condensation moisture.

General safety instructions

– The device must only be used in accordance with its intendedpurpose and within the scope of the
specifications.
– The measuring tools and accessories are not toys. Keep out of reach of children.
– Modifications or changes to the device are not permitted, this will otherwise invalidate the approval
and safety specifications.
– Do not expose the device to mechanical stress, extreme temperatures, moisture or significant vibration.
– The device must no longer be used if one or more of its functions fail or the battery charge is weak.
– Please ensure compliance with the safety regulations set out by local and national authorities with
regard to the correct and proper use of the device.
Safety instructions
Using class 2 lasers
Do not stare into the beam!
EN 60825-1:2014/AC:2017
– Attention: Do not look into the direct or
reflected beam.
– Do not point the laser beam towards persons.
– If a person's eyes are exposed to class 2 laser
radiation, they should shut their eyes and
immediately move away from the beam.
– Tampering with (making changes to) the laser
device is not permitted.
– Under no circumstances should optical instruments
(magnifying glass, microscope, binoculars)
10
EN
Laser radiation!
Class 2 laser
< 1 mW · 650 nm
Laser outlet
Laser warning message

Publicité

Table des Matières
loading

Table des Matières