Radio Operaton - auna Oldschool Mode D'emploi

RADIO OPERATON

1. Slide the FUNCTION switch to RADIO position, the unit will be "On" and
power LED indicator lights.
2. Select the desired FM mode by switching the FM/FM ST. BAND
SELECTOR on unit top panel.
3. Tune to your desired station with the TUNING knob. If FM STEREO mode
is selected and you tune to an FM Stereo station, the FM STEREO LED
Indicator will light.
4. Adjust the MASTER VOLUME knob to obtain the desired sound level.
FM & FM-STEREO RECEPTION
• Set the BAND SELECTOR to "FM" position. Stations will now be
received in MONO mode. When a FM station is weak or distorted,
listening is usually improved by switching the band selector to the FM
(mono) position.
• Set the band selector to "FM-ST" position to receive stereo broadcasts.
The FM-Stereo LED indicator will light up to show a FM stereo station is
detected.
Tips for best radio reception
• AM - The AM antenna is built inside the radio. If AM reception is weak,
change the position of the unit until the internal antenna picks up the
strongest signal.
• FM - If a stereo broadcast program is being received, the FM STEREO
INDICATOR will light. During FM Stereo reception, always keep the FM
TELESCOPIC ANTENNA fully extended for best performance. However,
if FM reception is weak, try repositioning the unit near an open window
until you get the best reception.
EN
37