Class 1 Laser Product - auna Oldschool Mode D'emploi

One Condensation
• When left in a heated room where it is warm and damp, water droplets
or condensation may form inside the unit.
• When there is condensation inside the unit, the unit may not function
normally. Let it stand for 1 to 2 hours before turning the power on, or
gradually heat the room up and dry the unit before use.
On protection against laser energy exposure

CLASS 1 LASER PRODUCT

CLASS 1 LASER PRODUCT
APPAREIL LASER DE CLASSE 1
PRODUCTO LASER DE CLASE 1
This product contains a low power laser device.
• As the laser beam used in this compact disc player is harmful to the
eyes, do not attempt to disassemble the casing.
• Stop operation immediately if any liqutid or solid object should fall into
the cabinet.
• Do not touch the lens or poke at it. If you do, you may damage the lens
and the player may not operate properly.
• Do not put anything in the safety slot. If you do, the laser diode will be
ON when the CD door is still open.
• If the unit is not to be used for a long period of time, make sure that all
power sources are disconnected from the unit. Remove all batteries
from the battery compartment.
• This unit employs a laser. The use of controls or adjustment or
performance of procedures other than those specified here may result
in exposure to hazardous radiation.
CAUTION
INVISIBLE LASER RADIATION
WHEN OPEN AND INTERLOCKS
DEFEATED.
AVOID EXPOSURE TO BEAM.
EN
31