Dimplex CAS400L Mode D'emploi page 6

Adjust the Flame Setting
With the remote control activated press once . FIRE will be blinking on the display. Press ENTER. The current flame
setting will be displayed F1-F6. Press the
setting press BACK twice to exit the menu and return to the home screen.
Setting the Date and Time
To set the date and time on the heater;
1. Press the Menu button
2. Press button 4 times
3. Press Enter when the Date & Time icon is blinking
4. Press Enter to set Time
5. Press and to set the Hour, press Enter
6. Press and to set the Minutes, press Enter to confirm the time
7. Press and to set the Day, press Enter
8. Press and to set the Month, press Enter
9. Press and to set the Year, press Enter to confirm the date
User Timer - To re-programme the factory default Timer Modes:
1. Press Menu Button
2. Press once to the schedule Icon is blinking. Press Enter
3. Press Twice then press Enter
*Days of the weeks are now displayed at the top of the screen*
Day 1 = Monday
Day 2 = Tuesday
Day 3 = Wednesday
Day 4 = Thursday
Day 5 = Friday
Day 6 = Saturday
Day 7 = Sunday
4. Press Enter to Modify Day 1 or Press
5. P1 will be displayed on screen
6. Press Enter to select P1, to navigate to P2, P3 or P4 press
7. ON will be highlighted, press Enter to set the on Time
8. Press or to adjust the on Hour time, press Enter to Confirm
9. Press or to adjust the on Minute time, press Enter to Confirm
10. Press or to adjust the Temperature setting, press Enter to Confirm
11. Press or to adjust the off Hour time, press Enter to Confirm
12. Press or to adjust the off Minute time, press Enter to Confirm
Press Enter to modify Programme P2, follow steps 5-12, Press
Press Enter to modify Programme P3, follow steps 5-12, Press
Press Enter to modify Programme P4, follow steps 5-12
To copy newly programmed P1-P4 heating programmes to other days press the Enter button.
Copy will be displayed on screen
To copy to the next day in sequence, press
Enter button.
The days of the week that are selected will be displayed at the top of the screen. The days that
have been deselected will not be visible (see Diagrams).
Press Enter to confirm, backlight will flash and return to home screen.
and buttons to adjust the setting. After you have selected your flame
to navigate to the desired day and Press Enter to Select
and press Enter to select
to skip to P3
to Skip to P4
button. To deselect the next day in sequence press
4