Binding The Controller With The Rf Remote Control - Vasco Agave E-Volve Manuel D'utilisation Et D'installation

5 BINDING THE CONTROLLER WITH THE
RF
02

BINDING THE CONTROLLER WITH THE RF REMOTE CONTROL

RF REMOTE CONTROL
The RF remote control and the RF receiver are not paired at the factory, proceed
as follow
RF pairing:
1. Put the RF receiver in pairing mode by pressing the Memo button for 5 sec.
RF LED will start to blink in RED.
2. Put the RF remote control in frost protection mode by pressing the
3x and press for 5 sec.
When the RF remote control and the RF receiver are linked, the
appears and is constantly displayed
RF pairing cancellation:
1. Press more than 10 seconds on Memo button of the RF receiver
5 sec.
5 sec.
10 sec.
button
symbol