Technical Specification - Vasco Agave E-Volve Manuel D'utilisation Et D'installation

TABLE OF CONTENTS
1

TECHNICAL SPECIFICATION

2 WARRANTY TERMS
3 DECLARATION BY MANUFACTURER
4 MOUNTING THE CONTROLLER
5 BINDING THE CONTROLLER WITH THE RF REMOTE CONTROL
6 ESTIMATED POWER CONSUMPTION DISPLAY:
SET THE RADIATOR POWER
7 OPERATION
1. DIAGRAM
2. POWER ON/STANDBY MODE
3. SELECTING THE OPERATING MODE
4. BOOST
5. ENERGY CONSUMPTION
6. KEYPAD LOCK/UNLOCK
7. WEEKLY AND DAILY PROGRAMMING
8. OPEN WINDOW DETECTION
9. INFORMATION ON PRIORITIES BETWEEN THE DIFFERENT MODES
The appliance is not to be used by persons (including children) with reduced phy-
sical, sensory or mental capabilities, or lack of experience and knowledge, unless
they have been given supervision or instruction.
Children being supervised not to play with the appliance
1 TECHNICAL SPECIFICATION
General specifications:
- Operating voltage: 230VAC 50Hz.
- Maximum power of 1500W, resistive load.
- Power supply cable: 800mm
- Standby consumption: <0,5W.
- Electronic PID (Proportional Integral Derivative) control, triggered by a triac
Environnement:
- IP44 (control panel horizontal oriented after installation).
- Operating temperature: 0°C to +50°C.
- Class II, after installation under the responsability of the Installer
(according to EN60335-1).
2 WARRENTY TERMS
See www.vasco-group.eu
Kruishoefstraat 50
B-3650 Dilsen
T. +32 (0)89 79 04 11
F. +32 (0)89 79 05 00
01
01
02
03
04
04
05
05
07
08
09
09
14
15