• Frost protection digital meter
When the device performs a lower temperature cycle due to opened window, a
meter appears on the display to show the cycle time.The counter is auto-
matically reset the next time Frost protection by opened window is activated
(automatic or manual activation).
• Stop the Frost protection mode
By pressing one button, you stop the Frost protection mode.
Note: if a temperature rise is detected, the device may return to the previous
mode (active mode before the open window detection).
9.
INFORMATION ABOUT PRIORITIES BETWEEN THE DIFFERENT MODES
• Principe
In Comfort, Eco and Frost protection modes, only orders of the open window
sensor will be considered.
In Auto mode, the device can receive different orders coming from :
- 7 day and daily programming integrated (Comfort or Eco orders);
- Open window detector
In general, it is the lowest received order which prevails.
In case of programmed Boost, the Boost activation will take prece-
dence over others orders received the device will switch off and the
Boost will be not activated.
• Examples
7 day and daily programming
+
Open window detector
= Frost protection
5 sec.
=
Eco
=
Frost protection
NL
NL
FR
FR
DE
DE
EN
EN
IT
IT
PL
PL
OPERATION
15