Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
User Manual
Installation
For installation of this product, please follow the steps below.
1.
Connect your Composite or S-Video source device to the converter using a
Composite or S-Video cable.
2.
Connect your VGA display or projector to the converter using a VGA cable.
3.
Connect the USB Type A connector from the USB Power cable to a USB power
outlet & connect the Mini USB to the Mini USB port on the converter
4.
Power on your source device, your display or projector and finally the converter
Installation is now complete.
Operation
This converter also features a built-in scaler which can be controlled with one push
button.
Use the "Resolution" button on the converter to cycle through all available resolutions
(see supported resolutions).
When two source devices are connected, through the S-Video and Composite inputs
simultaneously, use the CVBS / S-video switch on the converter to alternate between
them.
English
Publicité
Table des Matières
