Tv Operation - Citizen JDVD1900B Manuel D'instructions

TV operation

NOTES:
•
If a channel with no broadcast is
selected, the sound will automati-
cally be muted.
•
If a station being viewed stops
broadcasting, the TV will automati-
cally shut itself off after 15 minutes.
14
1
To turn on the TV/DVD, press POWER.
2
Adjust the volume level by
pressing VOL + or – . The
volume level will be indicated on
the screen by green bars. As the
volume level increases, so do
the number of bars. If the volume
decreases, the number of green
bars also decreases.
3
Set the TV/CABLE menu
option to the appropriate
position. (See page 17.)
4
Press the Direct Channel selection
buttons to select the channel.
TV Mode Direct Channel Selection
When the TV/CABLE menu option
is in the TV position, all channels
can be instantly selected by using
two buttons. (for example, to select
channel 2, press 0, then 2. If you
press only 2, channel selection will
be delayed for a few seconds.) For
channels 10 and above, press the
2 digits in order.
CABLE Mode Direct Channel Selection
When the TV/CABLE menu option is in the CABLE position, channels
can be selected as follows:
TO SELECT Cable TV CHANNELS:
1-9: Press 0 twice, then 1-9 as needed. Example, to select
channel 2, press 002.
10-12: Press 0, then the remaining 2 digits. Example, to
select channel 12, press 012.
13-99: Press the 2 digits in order. Example, to select channel
36, press 36.
100-125: Press the 3 digits in order. Example, to select channel
120, press 120.
NOTE FOR CHANNELS 1-12:
If only 1 or 2 buttons are pressed, the corresponding channel
will be selected in 2 seconds.
TV CABLE
VHF
VHF
2-13
2-13
UHF
STD/HRC/IRC
14-69
14-36
(A) (W)
37-59
(AA) (WW)
60-85
(AAA) (ZZZ)
86-94
(86) (94)
95-99
(A-5) (A-1)
100-125
(100) (125)
(5A)
VOLUME
TV - VHF/UHF channels
CABLE - CABLE TV channels
01
32
CH 02