Manual Clock Setting; Tv Operation - Citizen JCTV1586 Manuel D'instructions

MANUAL CLOCK SETTING

You must set the date and time manually for Timer
Recordings, ON/OFF Timer and Daylight Saving Time
if the Auto Clock process did not set them correctly.
EXAMPLE: Setting the clock to "8:30 AM", 29th (FRI)
March, 2002.
1
Press the MENU button.
Press the SET/TRACKING + or –
button to select the SYSTEM
SET-UP option, then press the
ENTER button.
2
Press the SET/TRACKING + or
– button to select the CLOCK
SET option, then press the
ENTER button.
3
Press the SET/TRACKING + or –
button to set the month, then press
the ENTER button.
4
Set the day, year and time as in
step 3.
After setting the clock, date and time
starts functioning automatically.
•
NOTES: After a power failure or disconnection of the
power plug, the time display will be lost. In
this case, set the present time again if the
Auto Clock did not set correctly.
•
To move cursor backward, press the CANCEL
button.
14

TV OPERATION

1
To turn on the TV/VCR, press the POWER button.
2
Adjust the volume level by
pressing the VOLUME + or –
button. The volume level will be
indicated on the screen by
green bars. As the volume level
M E N U
increases, so do the number of
TIMER REC SET
TV SET-UP
bars. If the volume decreases, the number of green
CH SET-UP
AUTO REPEAT ON OFF
bars also decreases.
SYSTEM SET-UP
3
Set the TV/CATV menu option to the appropriate
〈+/–/ENTER/MENU〉
position (See page 16).
SYSTEM SET-UP
TV
CLOCK SET
LANGUAGE/IDIOMA/LANGUE
CATV - CABLE TV Channels
AUTO CLOCK ON OFF
STANDARD TIME
DAYLIGHT SAVING TIME
VHF/UHF/CATV CHANNELS
〈+/–/ENTER/MENU〉
CLOCK SET
MONTH 3
DAY 1 (WED)
YEAR 2000
TIME 12 : 00 AM
〈+/–/ENTER/CANCEL/MENU〉
CLOCK SET
MONTH 3
DAY 29 (FRI)
YEAR 2002
4
8 : 30 AM Press the Direct Channel selection buttons to select
TIME
the channel.
〈+/–/ENTER/CANCEL/MENU〉
• TV mode direct channel selection
8 : 30 AM FRI
• CATV mode direct channel selection
• TO SELECT CATV CHANNELS:
NOTE FOR CHANNELS 1-12:
If only 1 or 2 buttons are pressed,
the corresponding channel will be
selected in 2 seconds.
NOTES:
- VHF/UHF Channels
TV
VHF
2-13
UHF
14-69
37-59 (AA) (WW)
60-85 (AAA) (ZZZ)
86-94 (86) (94)
95-99 (A-5) (A-1)
100-125 (100)(125)
When the TV/CATV menu option is in the TV
position, all channels can be instantly selected by
using two buttons (for example, to select channel 2,
press "0", then "2". If you press only "2", channel
selection will be delayed for a few seconds). For
channels 10 and above, press the 2 digits in order.
When the TV/CATV menu option is in the CATV
position, channels can be selected as follows:
1-9 Press "0" twice, then 1-9 as needed.
Example, to select channel 2, press "002".
10-12 Press "0", then the remaining 2 digits.
Example, to select channel 12, press "012".
13-99 Press the 2 digits in order.
Example, to select channel 36, press "36".
100-125 Press the 3 digits in order.
Example, to select channel 120, press "120".
•
If a channel with no broadcast is selected,
the sound will automatically be muted.
•
If a station being viewed stops broadcasting,
the TV will automatically shut itself off after
15 minutes.
VOLUME 32
CATV
VHF
2-13
STD/HRC/IRC
14-36 (A) (W)
01 (5A)
CH 012