NOTES:
• If a non-compatible disc is loaded, "In-
correct Disc", "Region Code Error" or
"Parental Error" will appear on the TV
screen according to the type of loaded
disc. If these appear, check your disc
again (see pages 22 and 35).
• Some discs may take a minute or so to
start playback.
• A "Prohibition" symbol
at the upper left of the screen. This
symbol means either the feature you
tried is not available on the disc, or the
unit can not access the feature at this
time. This does not indicate a problem
with the unit.
• When you set a single-faced disc label
downwards (ie. the wrong way up) and
press PLAY or OPEN/CLOSE on the
unit, "Reading" will appear on the dis-
play and then "Incorrect Disc" will be dis-
played.
• Some playback operations of DVDs may
be intentionally fixed by software pro-
ducers. Since this unit plays DVDs ac-
cording to the disc contents the software
producers designed, some playback
features may not be available. Also re-
fer to the instructions supplied with the
DVDs.
1
2
3
4
may appear
5
Playback procedure
Press TV/DVD to select the
DVD mode.
Press OPEN/CLOSE on
the unit or the remote con-
trol.
The disc tray will open.
Place a disc onto the tray.
Position it with the printed
label side up, align it with
the guides, and place it in
its proper position.
Press PLAY or OPEN/
CLOSE.
The disc tray closes auto-
matically.
On the screen,
changes
to "Reading" and then play-
back will commence.
• A menu screen may ap-
pear on the TV screen, if
the disc has a menu
feature. In this case,
press
,
,
,
or
ENTER to operate a
menu feature.
Press STOP to end playback.
• The unit memorizes the stopped point, depending on the
disc. "
" appears on the screen for approx. 4 seconds.
Press PLAY to resume playback (from the scene
point).
• If you press STOP again ("
unload the disc, the unit will clear the stopped point.
Then press OPEN/CLOSE.
The disc tray opens.
Remove the disc and press POWER.
The disc tray closes automatically and unit turns off.
Reading
" appears on the screen) or
25