Reflecta CyberView X5-MS Manuel D'utilisation page 15

d. Single Slide Scanning
Load the empty magazine into the tunnel FIRST until it touches the slide
•
transport arm completely. Slide the magazine forward to be sure that the
transport arm is in the fi rst slot of the magazine.
Press the eject button [I] to make the slide holder open exposing the loaded
•
slide.
Place the slide as illustrated [I] into the slide holder and press the slide holder
•
down [II].
Open the CyberView X 5.0 driver program to scan the slide.
•
Attention!
When using the single slide scanning function, please check the slide transport arm
has been moved completely into the unit and the cover for magazine tunnel is taken off .
I. II.
Slide
Holder
Eject
Button
15
15