Additional Features; One Button Scan - Reflecta CyberView X5-MS Manuel D'utilisation

Additional features

Manual Control Panel
a. You can advance or reverse the slide by pressing the navigation button
or and scan manually with the scan button
function.
Manual Control Panel
Please Note:
When installing your new scanner onto a Windows system that already has an-
other USB Flatbed scanner or All-in-one Scan/Copier/Printer device installed, it may be necessary
for you to disconnect the other scanner from the USB port for the Film scanner to work properly,

One Button Scan

1. Open the CyberView (Ref. page 16 to acquire the CyberView driver program)
2. Confi gure Scan Settings (see Page 17)
3. Select the Scan to directory, fi le format (TIF or JPG, once confi gured, Press the
scanner button ( ) to begin scanning.
NOTE:
If you do not open CyberView FIRST, the scan button will not function.
c. Slide Viewer
The scanner has a built in mini light panel which allows the slides to be man-
ually previewed with a backlight before inserting into the tray for scanning.
Insert the slide into the slide viewer for previewing. The scanner has to be
switched on. Gently press down on the top of the slide to engage the back
light for viewing the slide.
14
14
to enable one button scan
Mini Light Panel