Controls And Indicators - Jensen PHASE LINEAR Série Guide D'instructions

UV9

CONTROLS AND INDICATORS

1. CLOSE/OPEN
Press to activate the automatic mechanical system and move
the TFT monitor into viewing position. Press again to close
the TFT.
2. PIC/DISP
Press to adjust the Brightness and Contrast (see "Image/
Display Settings" on page 8).
With the monitor closed, press to view alternate LCD display
information.
When the navigation module is connected to the UV9, press
and hold to display the navigation user interface. The TFT
screen must be open for this function to operate.
3.AS/PS
Press to automatically store strong radio stations in the six
preset channels for the current band.
4. WIDE/BAND
Press to adjust the display aspect of the picture to one of two
settings: Full, Normal or STANDY.
With the monitor closed, press BAND to change between
three FM and two AM bands.
5. TILT - / |<<
Press to adjust the tilt angle of the screen one step at a time
or press and hold to adjust the angle in a continuous motion.
With the monitor closed, press to seek backward.
6. TILT + / >>|
Press to adjust the tilt angle of the screen one step at a time
or press and hold to adjust the angle in a continuous motion.
With the monitor closed, press to seek forward.
7. LCD Display
8. MUTE
Press to silence the receiver. Press again to resume sound.
NOTE: The UV9 features Softmute, which will allow the
volume to increase or decrease gradually when the
MUTE function is activated or deactivated.
9. IR Remote Control Receiver
10. SRC
Press to turn unit on. Press and hold to turn the unit off.
When on, press once to select playing mode.
11. VOLUME CONTROL ROTARY ENCODER
Rotate to adjust the volume. Press and release to enter and/
or confirm audio settings.
1 2
PIC
160
WATTS
UV9
8
mute
11
12
10 9
Press and hold to activate the Local (LOC) setting. Press and
hold again to turn Local recption off.
12. RESET
Press to reset system settings to factory default (except the
password and parental lock setting).
13. A/V Input
Attach a compatible A/V device.
5
3
AS
MULTIMEDIA RECEIVER
DISP
SERIES
7
14. USB Interface Connector
Connect a USB device for playback of music/video files.
15. TFT Display
16. ( )
Press to eject a disc.
Press and hold to reset core mechanism position.
5
4 6
15
BAND AS/PS OPEN
16
A / V
INPUT
13 14