Alarm; Setting The Alarm - TechniSat DIGITRADIO 10 C Notice D'utilisation

10.2 Alarm

The alarm switches on the DIGITRADIO 10 C at the set time. 2 alarm times can be
programmed. The description of how to programme Alarm 1 serves as an example.

10.2.1 Setting the alarm

> Push the Alarm 1/2 (20) button on the remote control.
> Use  /  to select the alarm you want to set and press the OK button.
> The specific alarm parameters can then be set.
Alarm
> Switch the alarm to [On] or [Off].
Repeat (Rpt.)
> Here you can select from Daily (every day of the week), Once, Weekdays
(Mon - Fri) or Weekends (Sat and Sun). >
setting.
130
Press the OK button to save the