Your pellet stove has been approved for installation in the USA and Canada. It may also be installed in a
manufactured or mobile home. Your stove is Certified to ASTM E1509-12 (2017)and Certified to ULC S627-
00. This manual describes the installation and operation of the U.S. Stove, 5710-XH wood heater. This heater
meets the 2020 U.S. Environmental Protection Agency's crib wood emission limits for wood heaters sold after
May 15, 2020. Under specific test conditions this heater has been shown to deliver heat at rates ranging from
13,281 to 27,492 Btu/hr. This heater achieved a particulate emissions rate of 1.0 g/hr when tested to method
ASTM E2779-10 (*and an efficiency of 69%).
Heating Specifications
Fuel Burn Rate* (lowest setting)
Burn Time (lowest setting)
Hopper Capacity
Flue Size
Electrical Specifications
Electrical Rating
Watts (operational)
Watts (igniter running)
Dimensions
Overall: Height x Width X Depth
IT IS AGAINST FEDERAL REGULATIONS TO OPERATE THIS WOOD HEATER IN A MANNER INCONSISTENT
WITH THE OPERATING INSTRUCTIONS IN THE OWNER'S MANUAL.
Note: Register your product online at
www.usstove.com or download the
free app today. This app is available
only on the App Store for iPhone
and iPad. Search US Stove. Save your
receipt with your records for any
claims.
© 2021 United States Stove Company
1.5 lbs. /hr. (0.7 kg/hr)
33 hrs. (approximate)
50 lbs. (22.7 kg)
3" or 4"
110-120 Volts AC, 60 HZ, 3.0 Amps
125
310
32-3/16" (819 mm) x 19" (482 mm) x 23" (585 mm)
WARNING:
-2-
INTRODUCTION
* Pellet size may effect the actual rate of fuel
feed and burn times. Fuel feed rates may vary
by as much as 20%. Use PFI listed fuel for best
results.
For Customer Service, please
call:
1-800-750-2723 Ext 5050 or;
Text to 423-301-5624 or;
Email us at:
customerservice@usstove.
com