Frequently Asked Questions - Honeywell HUT-300 Série Mode D'emploi

FREQUENTLY ASKED QUESTIONS

Cleaning
Question
Can I use dish soap to clean my humidifier?
Can I add water treatments to this humidifier?
Operation
Question
What setting should I put my humidifier on?
I ran my humidifier overnight in a very dry
room and the humidity barely changed but my
water level decreased quite a bit
How do I know my humidifier is operating
properly?
The power light is on but my humidifier is not
putting out any visible mist.
8
Answer
It is not recommended that you use dish soap to clean
your humidifier as it is very hard to remove all the soap
and this could cause damage to your humidifier.
You should only add water treatments to your humidifier
that are specifically made for ultrasonic humidifiers
such as the Protec Cleaning Cartridge, model PC-1,
TM
PC-1C, PC-2 or HDC-300, Demineralization Cartridge.
Using water treatments that are not recommended for
ultrasonic humidifiers could damage your humidifier.
Answer
You should run your humidifier on the highest setting
if your room is very dry. Once you are at a more
comfortable humidity level you can turn your output
setting to a lower setting.
It may take a few days for your humidity to increase.
Wood, rugs and other objects in your room will absorb
moisture before you can feel the effects, if it is
extremely dry.
You will see visible mist coming from your
humidifier.
You may need to clean your humidifier. There could be
an excessive build up of minerals on the nebulizer.