Humidity Control - Honeywell HUT-300 Série Mode D'emploi

OPERATION
Power
With the power switch in the
OFF position, plug the filled
humidifier into a polarized 120V
outlet. DO NOT FORCE THE
POLARIZED PLUG INTO THE
OUTLET; It will only fit one way.
DO NOT plug in humidifier
with wet hands to avoid
electric shock.
Output
Set output control. It is
recommended that you operate
your humidifier at the highest
setting until you reach a
comfortable humidity level.
Indications your humidifier is
operating are the illuminated
power light as well as a fine
visible mist being emitted from
the mist nozzle.
CAUTION: WHEN MOVING HUMIDIFIER, TURN HUMIDIFIER
OFF, UNPLUG AND REMOVE THE WATER TANK.
DO NOT OPERATE YOUR HUMIDIFIER WITHOUT THE TANK IN
PLACE OR IF THE UNIT IS EMPTY.

Humidity Control

Once you have reached a
comfortable humidity level your
humidifier should be turned to
a lower setting. A comfortable
humidity level is between
40-60%.
To monitor your humidity level
it is recommended that you use
a hygrometer such as model
Honeywell H10C.
If you notice condensation on
the walls or windows you should
turn your humidifier off as your
humidity level is too high.
5