Functions - STEINEL GL 60 S Mode D'emploi

Functions

, ,
The sensor-switched light can be put into service
after mounting the sensor unit and connecting it to
the mains power supply. The controls for adjusting
Twilight setting
(response threshold)
(factory setting:
daylight operation 2000 lux)
Switch-off delay
(time setting)
(factory setting: 5 sec.)
Basic light level
(factory setting:
dimmer off: 0%)
Reach setting / adjustment
The sensor has a maximum reach of 12 m. The
detection zone can be optimised to suit individual
needs. The shrouds provided are used for blanking
out any number of lens segments or to shorten reach
as required. This prevents the light from being activat-
the twilight response threshold, time and basic light
level are positioned next to the lamp socket.
Sensor response threshold can be infinitely varied
from 2-2000 lux.
Control dial set to
approx. 2000 lux.
Control dial set to
approx. 2 lux. To adjust the detection zone in daylight,
set control dial to
Light ON duration can be infinitely varied from
5 sec. to 15 min.
Control dial set to – = shortest time
Control dial set to + = longest time (15 min.)
It is recommended to select the shortest time
– when adjusting the detection zone
Light output can be infinitely adjusted up to 50 % of
maximum power when set to stay ON all the time.
This means: light is only switched from a basic light
level of 1-4 watts to maximum output when move-
ment is identified in the sensor's detection zone.
Note:
Basic light function only with dimmable lights.
ed unintentionally, e.g. by cars, passers-by etc. and
allows to you to target danger spots. The shrouds
can be divided or cut with a pair of scissors along the
vertical and horizontal grooves. Turning the sensor
unit permits final precision adjustment.
- 11 -
= daylight operation
= twilight operation
(daylight operation).