Use - Web Server; Home - Bodet HARMONYS Notice D'installation Et D'utilisation

3. USE - WEB SERVER

There are two methods of accessing the web interface:
1) Open a page in your internet browser then, in the search bar, enter the IP address of the product present on your
network (for example, 192.0.1.128).
2) Use the Sigma software, in the menu Configuration > IP devices > Harmonys Flash tab click on the button Web
server access to open the web server (refer to software manual, 607726).
The SIGMA software can be used to:
- detect the devices present on the network,
- configure each device (independently of each other, or copy the settings of one device to a group of devices),
- update the device's software version,

3.1 Home

The home page contains the following general information:
- Product: product type.
- Name: product name + MAC address (in correspondence with the MAC address noted on the product identification
label during installation). By default: "Bodet-MAC address" (modifiable in the Network configuration
menu). The default value can be used to locate the product on the network on commissioning.
7