Digitus DS-55306 Mode D'emploi page 7

Connection
1. Point to Point connection:
Notebook
2. Many to one connection
Notebook
10 pcs
Notebook
Connection instruction
1. Plug the transmitter into the source device.
2. Connect HDMI output to HDMI display device by HDMI cable.
3. Power on the device (power led lights) and it works.
Note:
1. When the wireless signal transmits through wall, glass or other
obstacles, it will cause signal loss. Please install this device in good
environment with few obstacles.
2. The external environment wireless signal will affect transmission, such
as micro waver, wireless mouse and keyboard etc.
HDMI Extender
TX sender
HDMI Extender
TX sender
HDMI Extender
TX sender
Power HDMI Extender
RX receiver
Power
HDMI Extender
RX receiver
HDMI output
HDMI display
HDMI output
HDMI display