Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
EN
GENERAL INFORMATION
7. USER PARAMETER MENUS
In this menu, general settings are made that do not interfere with
the control process.
In normal operating mode (comfort mode 5.1), access is through
simultaneously pressing the
With
and
you can scroll through the different parameters.
Use
to get to the relevant parameter settings. With
parameters are changed and saved with
The parameter settings remain available even after a battery
exchange.
PARAMETER SETTINGS
and
keys for about 5 seconds.
.
Learning mode:
By pressing
for about 5 seconds you get to the learning mode. By pressing
mode.
Unit of the temperature display:
• °C: Celsius
• °F: Fahrenheit
Factory settings: °C
Calibration of the room thermostat sensor in the room thermostat:
This parameter is used for compensating temperature deviations of the room thermostat. The temperature is set with
and
in 0.1K steps.
Calibration of the room temperature sensor in actuator mode:
This parameter is used for compensating temperature deviations of the thermostat head. The offset values are set with
and
.
saves the settings.
Factory settings: -3K
Offset scope: "-7K" – "+1K" (1K steps)
Delete settings:
Temperatures and user parameter settings are reset to factory settings. Press
Indication of software version
End of user parameter menu:
By pressing
you get back to the main menu.
and
saves the settings.
again you will leave this
and hold for about 5 seconds.
19
Publicité
Table des Matières
