FMA D61 Mode D'emploi page 15

EN
MODES OF OPERATION
5.1 NORMAL HEATING MODE WITH VENTILATOR SUPPORT (COMFORT MODE)
In this operating mode, the room thermostat will regulate to the
pre-set target temperature.
From this screen, pressing the
keys will show the pre-set target tempera-
ture (flashing). Pressing the
again will set the desired target tempera-
ture. By pressing the
red target temperature is confirmed.
From this screen you get to the next mode by pressing the
key twice (5.2).
Factory settings: 22°C
Temperature scope: 18°C – 26°C (0.5°C steps)
5.2 HEATING MODE WITH VENTILATOR SUPPORT (BOOST OPERATION)
In this operating mode, the room thermostat will regulate to the
pre-set target temperature. In order to reach the desired room
temperature as quickly as possible, boost mode will apply maxi-
mum heating output.
a) Setting the target temperature: From this screen, pressing the
or key will indicate the target temperature (flashing).
Pressing the or key again will set the target temperature.
By pressing the key, the desired target temperature is con-
firmed.
From this screen, pressing the
next mode (5.3).
Factory settings: currently set target temperature of normal hea-
ting mode
Timer factory settings: 2h
Temperature scope: 18°C – 26°C (0.5°C steps)
b) In boost mode, the display will alternate between measured
room temperature and timer.
c) As soon as the timer period (2h) has expired, comfort mode is
activated automatically (5.1).
or
or keys
Key, the desi-
key twice will get you to the
COOLING
COMFORT
mode
15