FMA D61 Mode D'emploi page 17

EN
MODES OF OPERATION
5.5 AIR RECIRCULATION MODE ONLY (SUMMER BREEZE EFFECT)
In this operating mode, ventilators are switched on depending on
the temperature. The valve is opened.
From this screen, by pressing the
key will indicate the pre-set no. of revolu-
tions (flashing). By pressing the
key again, the desired no. of revolutions
can be set.
By pressing the
desired no. of revolutions.
From the display you get to the next mode by pressing the
key twice (5.6).
Factory settings: 1
Scope of no. of revolutions: 1,2,3
5.6 HEATING MODE WITHOUT VENTILATOR SUPPORT
In this operating mode, the room thermostat regulates to the pre-
set target temperature, without ventilator support.
From this screen, pressing the
keys will indicate the pre-set target tem-
perature (flashing). Pressing the
keys again will set the desired target tem-
perature. By pressing the
desired target temperature is confirmed.
From this screen you get to the next mode
(5.7) by pressing the
Factory settings: 22°C
Temperature scope: 18°C – 26°C (0.5°C steps)
key confirms the
key twice.
or
or
or
or
key, the
17