FMA D61 Mode D'emploi page 16

EN
MODES OF OPERATION
5.3 COOLING MODE WITH VENTILATOR SUPPORT (COMFORT COOLING)
In this operating mode, the room thermostat will regulate to the
pre-set target temperature. In order to use the maximum cooling
output, the ventilators operate at their maximum no. of revolu-
tions. The valve is opened.
From this screen, pressing the
key will show the set target temperature
(flashing). By pressing the
the desired target temperature can be set.
By pressing the
get temperature is confirmed.
From this screen you get to the next mode (5.4) by pressing the
key twice.
Factory settings: 22°C
Temperature scope: 18°C – 26°C (0.5°C steps)
5.4 COOLING MODE WITH VENTILATOR SUPPORT (SOFT COOLING)
In this operating mode, the room thermostat will regulate to the
pre-set target temperature. This mode of operation is suitable for
rooms with very low sound levels. The valve is opened.
From this screen, pressing the
keys will show the set target temperature
(flashing). By pressing the
you can set the desired target tempera-
ture. By pressing the
red target temperature is confirmed.
From this screen you get to the next mode (5.5) by pressing the
key twice.
Factory settings: currently set target temperature of comfort coo-
ling.
Temperature scope: 18°C – 26°C (0.5°C steps)
16
or
or key,
key, the desired tar-
or
or keys
key, the desi-
COOLING
SOFT mode