Installation; Plates; Dimensions; Free Room - Daikin ZANOTTI SPO Série Mode D'emploi

6

Installation

6. 1 1 P lates
The unit is supplied with warning and attention plates as listed in the relevant table.
6. 2 2

Dimensions

6. 3 3 Location
To obtain optimal operation of the unit act as follows:
A) Place the unit in a well ventilated room, far from heat sources.
B)
Limit the number of door openings.
C)
Make sure that the unit has good air supply and discharge.
D) Fit a drain line to the defrost water drain connection in the lower part of the evaporator.
Solution 1
Solution 2
6. 4 4

Free room

When installing the unit leave enough free room to allow opening, correct use and easy maintenance in safe
conditions.
6. 5 5 Installation
Place the condensing unit on the floor
Install the evaporator as follows:
A)Drill the holes in the ceiling keeping the necessary distance from the wall.
A
SPO 121-123 357
SPO 221 390
SPO 135 427
B C
337 620
427 820
427 820
Solution 3
D
614
1034
1693
Installation in a
coldroom with
more than one unit
20