Campbell Hausfeld PW340200 Instructions D'utilisation page 9

GETTING TO KNOW YOUR UNIT
NOTE: Photographs and line drawings used in this manual are for reference only and do not represent a specific model.
Compare the illustrations with your unit to familiarize yourself with the location of various controls and adjustments.
Save this manual for future reference.
Nozzle Holder
Handle
Hose Holder
Frame
Pump Outlet
Pump Inlet
High Pressure Pump: Increases
the pressure of the water supply.
Figure 1
NOT SHOWN:
Detergent Siphon Hose: Feeds cleaning agents into the pump to mix with the water. See How To Apply Chemicals/Cleaning Solvents
instructions in Operation section.
High Pressure Hose: Carries the pressurized water from the pump to the gun and spray wand.
Quick-Connect Spray Wand: Allows the user to quickly change out high pressure nozzles. See How To Use Spray Wand instructions in
Operation section.
Spray Gun: Connects with spray wand to control water flow rate, direction and pressure.
BASIC ELEMENTS OF AN ENGINE
Refer to the Engine Owner's Manual for location and operation of engine controls.
Choke Control: Opens and closes carburetor choke valve.
Starter Grip: Pulling starter grip operates recoil starter to crank engine.
Engine Switch: Enables and disables ignition system.
Quick Connect Nozzles
Spray Gun Holder
Engine: Drives the high pressure pump. Refer to the
Engine Owner's Manual for location and operation of
engine controls.
7