Dmx Linking; Overhead Mounting - Chauvet Professional OVATIONE910FC Guide Rapide

AC Plug
Connection
AC Live
AC Neutral
AC Ground
To eliminate unnecessary wear and improve its lifespan, during periods of non-use completely
disconnect the product from power via breaker or by unplugging it.
Replacing the Fuse
1. Disconnect this product from power.
2. Using a Phillips-head screwdriver, unscrew the fuse holder cap from the housing.
3. Remove blown fuse and replace with a good fuse of the same type and rating.
4. Screw the fuse holder cap back in place and reconnect power.

DMX Linking

The Ovation E-910FC will work with a DMX controller using a 3- and 5-pin DMX serial connection. A DMX Primer is
available from www.chauvetprofessional.com.
DMX Connection
The Ovation E-910FC uses a 3- and 5-pin DMX data connection for its DMX personalities: 1Ch, 3Ch, 5Ch, 7Ch, 10Ch,
12Ch, 13Ch, 16Ch, and HSV. See the User Manual for information about connecting and configuring the product for
DMX operation.
Master/Slave Connection
The Ovation E-910FC uses the DMX data connection for its master/slave mode. See the User Manual for information
about how to connect and configure the product for master/slave operation.
RDM (Remote Device Management)
Remote Device Management, or RDM, is a standard for allowing DMX-enabled devices to communicate bi-directionally
along existing DMX cabling. Check with the manufacturer or the DMX controller's User Manual, as not all DMX controllers
have this capability. The Ovation E-910FC supports RDM protocol that allows feedback to make changes to menu map
options. Download the User Manual from
Mounting
Before mounting this product, read the
mounting clamps can support the weight of the product. For the Chauvet line of mounting clamps, go to:
http://trusst.com/productcategory/truss-clamps/.
Product Mounting Diagram
Lens Tubes
The following lens tubes are available for purchase:
• 19°, 26°, 36°, and 50° with gel frame (6.25 in/159 mm accessories)
• 14°, 15–30° and 25°–50° zoom gel frame (7.5 in/191 mm accessories)
Ovation E-910FC QRG Rev. 15
QUICK REFERENCE GUIDE
Wire (U.S.)
Black
White
Green/Yellow
www.chauvetprofessional.com
Safety Notes. Use at least one mounting point per product. Make sure the
Mounting clamp

Overhead Mounting

Wire (Europe)
Brown
Blue
Green/Yellow
for more details.
Safety cable
Mounting bracket
Secure the safety cable using
the passageway on the top of
the product
* Lens tubes sold separately
EN
Screw Color
Yellow/Brass
Silver
Green
2