Intended Use; Transport; Installation And Connection; Installing The Filter Module And Connecting It With The Upstream Filter Module - Oase ProfiClear Premium XL Notice D'emploi

- EN -
2.3

Intended use

Only use the product described in this manual as follows:
• For cleaning garden ponds.
• Operate in accordance with instructions. (→ Technical data)
The following restrictions apply to the unit:
• Only operate with water at a water temperature of +4 °C to +35 °C.
• Never use the unit with fluids other than water.
• Do not use for commercial or industrial purposes.
• Do not use in conjunction with chemicals, foodstuff, easily flammable or explosive substances.
3

Transport

W A R N I N G
Due to the high weight of the unit, spinal injuries or crushing of limbs is possible when carrying
the unit. The unit weighs more than 25 kg.
• Have a minimum of 4 persons carry the container on the handles to avoid spinal injuries.
• Protect limbs from crushing.
• Do not transport the unit when it is filled.
 B
The filter module is equipped with four handles for carrying. Do not use any other carrying or transport
aids (e.g. transport by crane).
4

Installation and connection

4.1

Installing the filter module and connecting it with the upstream filter module

Max. three ProfiClear Premium XL Moving Bed Module in succession can be installed in one filter
system.
How to proceed:
 C
1. Push the transition sleeve onto the inlet and fasten it with the hose clip.
– For later assembly work, turn the hose clip so that the hose clip screw is accessible from the
side.
2. Push the filter module up to the previous filter module so that its outlet is positioned in the transition
sleeve of the filter module up to the stop.
– Ensure that the soiled water outlets are all on the same side.
3. Secure the connection with a hose clip.
– For later assembly work, turn the hose clip so that the hose clip screw is accessible from the
side.
20