Maintenance; External Cleaning; Maintenance Of The Water Block® Safety Valve; Regular Check Of The Water Block® And One-Way Valves - Smeg DEMI-One Mode D'emploi

EXTERNAL CLEANING

Clean with a damp cloth using non-abrasive and non-corrosive detergents (neutral pH value).
MAINTENANCE OF THE WATER BLOCK® SAFETY VALVE
The inlet filter of the Water Block® valve should be cleaned on a regular basis, depending on the city water
quality and how often the demineralizer is used.
REGULAR CHECK OF THE WATER BLOCK® AND ONE-WAY VALVES
!
ATTENTION
To ensure compliance with subsection 4.6 of EN1717, have the Water Block® and the one-way valve
checked at least once a year; in case a sterilizer is attached to the system, this could be done during
the scheduled maintenance visits for the sterilizer.
It is further recommended to check all related devices fitted to the steriliser to ensure that the
hydraulic connection between demineralizer and sterilizer corresponds to category 2, in accordance
with EN 1717.

MAINTENANCE

Revision n° 2 User manual DEMI-One Editing: 03/2009
INSTRUMENTS
29