Operation - M.J. MALLIS GROUP SIAT F1 Manuel D'instructions Et Pièces Détachées

12-OPERATION

12.12 CLEANING
Operator qualification 1
Before carrying out any cleaning or maintenance operations, set the
main switch to position 0 and remove the power supply plug.
Use dry cloths or light cleansing solutions. Do not use water or sol-
vents
12.13 TABLE OF ADJUSTMENTS
OPERATION
Film reel change
Automatic or manual working cycle choice
Manual; mode operation
Automatic mode operation
12.14 SAFETY EFFICIENCY CHECK
-Emergency stop button.
30/44
Via Puecher, 22 - 22078 TURATE (CO) ITALY - Tel. 02964951 - Fax 029689727 - http://www.siat.com - Email: siat@siat.com
OPERATOR QUALIFICATION
1
1
1
1
SIAT S.p.A.
CHAPTER
11.1
12.1
12.1
12.2