7
Press
month setting.
• To move back to the previous setting, press
• The first two digits of the year are fixed.
8
Repeat this procedure until the date and time are
completely set.
• The camera only displays the time in 24-hour time system (
would be
14:00
"
9
Press
.
• For a more accurate setting, press
seconds. The clock starts when you press the button.
10
Close the lens barrier to turn the camera off.
• The date and time settings will be canceled if the camera is left
without batteries for approximately 30 minutes.
Note
to set the year, and press
).
"
to move to the
.
when the time signal hits 00
2 p.m
"
"
En
En 15