Technical Specifications - miniland Warmy Digy Manuel

ENGLISH
6. MAINTENANCE
Follow the instructions below for any maintenance tasks:
• The device itself (main body):
· Always power the device down and unplug it before proceeding with any cleaning
tasks.
· Only use a damp cloth to clean it.
• The device itself (heating chamber):
· Depending on the quality of the water used, lime deposits may build up over time at
the base of the heating chamber. These lime deposits must be removed regularly
by pouring a mixture of 100 ml of hot water and 100 ml of white vinegar into the
heating chamber. Pour directly into the basin and allow to soak for around 30
minutes. Subsequently, empty the receptacle and wipe it with a damp cloth.
· There are specific products on the market for removing lime from this type of device;
they can also be used to clean it. In any case, before using them, make sure that
they are not abrasive.
• Removable accessories:
· Adapter ring, tray and measuring cup can be washed using a sponge with soap and
water or can be cleaned in the dishwasher in the top tray.

7. TECHNICAL SPECIFICATIONS

• Voltage: 220-240V CA.
• Frequency: 50 – 60Hz.
• Consumption: 400W.
8. INFORMATION ABOUT THE DISPOSAL OF THE PRODUCT
It is necessary to dispose of the product in a responsible fashion. For this
reason, if the product shows a symbol of a rubbish bin with an X through
it, do not dispose of it together with other domestic waste. Once its service
life has reached its end, these products must be disposed of by taking
them to a collection and treatment centre which has been designated
by the local authorities. You can also get in touch with the establishment
where you purchased the product for your tank.
18