General Options - PURE Highway H250S Mode D'emploi

General options

In any mode, press and hold the DISP button to
enter the system setup menu. Press the
buttons to scroll through the options, and turn the
VOLUME dial to adjust a setting.
CLOCK
1. Press the VOLUME dial.
2. The hour will flash on and off. Turn and press
the VOLUME dial to set the hour. Repeat to set
the minutes.
LANGUAGE
You can select the language that your Highway
uses for menus and options.
1. Press the VOLUME dial.
2. Turn and press the VOLUME dial to select
a menu language from 'English', 'French',
'German' or 'Italian'.
AUX SENS (AUX mode)
Turn and press the VOLUME dial to increase or
decrease the audio boost level for the AUX input. The
available options are LOW, MID or HIGH.
14
CYCLE: ON/OFF
This function is used to control how Highway
displays the track name, folder name, title, album,
or
and artist in CD/MP3, USB and iPod mode:
ON: Select this option to specify that the display
will automatically alternate between the TRACK,
FOLDER, TITLE, ALBUM and ARTIST.
Note: In iPod mode, the cycle option only alternates
the display between TITLE, ALBUM and ARTIST.
OFF: Select this option to stop the display from
automatically alternating between the TRACK,
FOLDER, FILE, ALBUM, TITLE, and ARTIST.
To change the information that is currently
displaying on the screen (Highway displays the
Track name by default, except for iPod mode),
press the DISP button.
REAR / S-W
If you are using Highway with an external amplifier,
you can use this setting to specify if you are
connecting the Rear line-outs to an external
amplifier connected to full range speakers (REAR)
or a Sub Woofer (S-WOOFER). See the diagram on
page 16 for more information.
Turn and press the VOLUME dial to select either
REAR or S-WOOFER.
REAR: Select this option to provide an external
amplifier with a full range signal from the rear left
and right line-outs.
S - W O O F E R : S e l e c t t h i s o p t i o n t o a l l o w
adjustments to be made to a dedicated subwoofer
amplifier from the EQ menu without affecting the
signal from the front line-outs, or sound from the
built-in amplifier.
DIMMER: ON/OFF
Turn and press the VOLUME dial to toggle the
DIMMER setting 'ON' or 'OFF'.
ON: The display brightness is dimmed.
OFF: Disables the dimmer setting so that the LCD
brightness is set to the maximum level.
BEEP: ON/OFF
Turn and press the VOLUME dial to toggle the
beep sound that is made when pressing a button
'ON' or 'OFF'.
12/24H
Turn and press the VOLUME dial to change the
time format to either '12HOURS' or '24HOURS'.
CT: ON/OFF
Turn and press the VOLUME dial to toggle
automatic time updates from the digital or FM radio
signal 'ON' or 'OFF'.