PURE Highway H250S Mode D'emploi page 15

REG (Regional programme) function
When the REG function is ON, Highway will
automatically tune into the station with the strongest
signal within the specified region using the AF
control. If this function is OFF and the regional area
changes as you drive, Highway will tune into a
station within the current region. This setting is ON
by default.
Notes:
• This function is disabled when Highway is tuned
into a national station, such as BBC R2.
• The REG function ON/OFF setting only applies
when the AF function is ON.
1. Press and hold the DISP button on the front
panel until 'CLOCK' is displayed on the screen.
2. Press the or buttons to scroll to 'REG'.
3. Turn the VOLUME dial to select ON or OFF.
Manually tuning to a regional station in the
same network
You can manually tune to a regional station in the
same network when the AF function is ON and the
REG function is OFF.
Note: This function can be used when a regional
broadcast of the same network is received.
TA (Traffic Announcement)
In TA standby mode ('TA' icon is lit on the display),
Highway will wait for a TA signal from any available
FM station that is in range. When Highway
receives a TA or EON traffic signal, Highway
will automatically tune into the FM station it has
found with a traffic announcement. When the
traffic announcement has finished, Highway will
automatically tune back to the last FM station you
were listening to.
To cancel an active traffic announcement, press
the TA button.
Setting the TA standby mode
Note: If TA standby mode is on, digital to FM
service following will not work.
Press the TA button to toggle the 'TA' icon on
and off. When the 'TA' icon is lit in the display,
Highway will remain in TA standby mode until a
traffic announcement is broadcast. When a traffic
announcement broadcast starts, Highway will
display 'TRAF INF' if the traffic announcement is
being broadcast from the radio station that you are
currently listening to. If Highway tunes in to a traffic
announcement from another radio network, 'EON
INF' will appear on the display.
PTY (Programme Type)
You can use the PTY (Programme Type)
function to search for radio broadcasts that
match a certain genre. In Europe there are thirty
one predefined programme type genres.
* Some countries do not currently broadcast PTY
information.
* In the TA standby mode, a TP station has priority
over a PTY broadcast station.
To use the PTY function to search for a particular
type of radio broadcast:
1. Press the MENU button.
2. Turn and press the VOLUME dial on the front
panel to select the genre of the PTY broadcast
that you want to search for.
Highway will start to search for a matching radio
broadcast and tune into the first radio station that
matches the specified PTY type.
Repeat the above steps to search for another
station that matches the specified PTY type.
EN
13