Installation Instructions; Flow Diagram; Potential Equalisation - Hansgrohe Raindance E 400 x 400 mm Air 1jet 26252000 Instructions De Montage Et Mode D'emploi

Safety Notes
Gloves should be worn during installation to prevent
crushing and cutting injuries.
The shower system may only be used for bathing,
hygienic and body cleaning purposes.
Children as well as adults with physical, mental and/
or sensoric impairments must not use this product
without proper supervision. Persons under the influ-
ence of alcohol or drugs are prohibited from using
this product.
Do not allow the streams of the shower touch sen-
sitive body parts (such as your eyes). An adequate
distance must be kept between the shower and you.
Pursuant to DIN VDE 0100 T 701 section
701.415.2, the overhead shower must be connected
to potential bonding.

Installation Instructions

• The pipes and the fixture must be installed, flushed
and tested as per the applicable standards.
• Prior to installation, inspect the product for transport
damages.
Technical Data
Operating pressure:
Recommended operating pressure:
(1 MPa = 10 bar = 147 PSI)
Hot water temperature:
Thermal disinfection
The product is exclusively designed for drinking water!
Assembly 26472000 / 26481000 see page 33
Assembly 26252000 / 2625300X see page 36
4
English
max. 0,6 MPa
0,17 – 0,4 MPa
max. 60°C
max. 70°C / 4 min
Symbol description
Do not use silicone containing acetic acid!
Dimensions (see page 31)

Flow diagram

(see page 31)
Cleaning (see page 39) and enc-
losed brochure
Spare parts (see page 40)

Potential equalisation

(see page 34)
Test certificate (see page 44)