Scheduling The Robot - Amibot PRIME 2 Mode D'emploi

Operating the appliance
NOTES:
• When the robot is fully charged, it beeps 5 times. The AUTO button indicator light
is steady blue.
• If the robot is on standby, press the AUTO button on the robot or the ON/OFF
button on the remote control to start a cleaning cycle.
• The robot's cycle can be interrupted and it can be manually controlled using the
remote control. When you reactivate automatic cleaning, the robot starts a new
path.

Scheduling the robot

With the schedule feature, the robot can start a cleaning cycle at the
time you choose every day of the week. The time and delayed start
time can be reset at any time via the remote control.
Figure 1
First, set the time. Press the CLK button on the remote control for
3 seconds (Figure 1). The time flashes; use the arrows to adjust the
hour and minutes (Figure 2). Press CLK again to validate the time.
Figure 2
15
EN